Tandem Reciprocating Compressors From Tanair
|
* Dual Motor Assembly - Used independently for uninterrupted running during maintenance. * Dual Motor Pump Assembly - Speedy filling of receiver when used in tandem. * Equipped with tandem starter, automatic stop / star control, receiver pressure gauge and drain valve - Added value. * 272 litre receiver - For greater stored air.
|
Tanair 3BD - 270 / 3T
:
|
| 3BD -270 / 3T | 850 / 300T | Model |
Tanair
|
| Motor(s) | 2x 2.2KW / 2x 3hp | ||
| Piston Disp L/MIN | 840 | Voltage(s) | 230/ 415v Options 50hz |
| Piston Disp CFM | 30 | Receiver Capacity | 270 Litres |
| F.A.D. L/MIN | 566 | Displacement | 770L/min/ 28.0 cfm (Cast Iron Liners) |
| F.A.D. CFM | 20.4 | Pressure | 9 Bar / 140 Psi |
| HP | 3+3 | Noise Level | 79 Dba |
| Phase | 1 - 32A | R.P.M. | 1000 |
| R.P.M. | 1167 | Aftercooler | Yes x 2 |
| No Cylinders | 2+2 | Stages | 2x2 |
| No Stages | 1+1 | Part No | 200001273 |
| Max. Pressure Bar | 10.5 | ||
| Max. Pressure PSI | 150 | ||
| Receiver Capacity Litres | 272 | ||
| Packed Dimensions (HxWxL) MM | 1140x560x1960 | ||
| Weight KGS | 176 |
|
We also offer Tandem control units:
Autochange Control Panels 230 & 415 Volt Designed & Built by our inhouse Technicians:"Autochange Over Control Panels" both in 230 & 415 Volt options, simple to install to compressor - No programming required, fully preset to specific requirement(s). The Purpose for the AutoChange system is to Automate the sequence of control to equal duty, if one Pump assembly Fails and Air Requirement is Critical, The other will sense there is failure and Automatically start the functional unit. If air consumption is too high for one unit the other will cut in as and when required, Analogue Hour Measuring, Safety Overloads, Switchable Relay, 24hr Control, Independent Fused control are some of the benefactors of choosing our purpose built control systems, Pressure Switch Control and Solenoid Unloading Facility, Remote Stop/ Starting (if required). |
